mmd monitor/quartzek ? an ilsi company, 5458 louie lane, reno, nv 89511 phone: (775) 851-8880, www.mmdcomp.com ? revision: 07/31/13 d revisions only with customer approval pg 1 of 2 m m v v i i p p , , m m v v i i l l & & m m v v i i v v s s e e r r i i e e s s v v c c x x o o marking detail line 1 = mxxxxx m = mmd xxxxx = frequency in mhz line 2 = syywwl s = internal code yyww = 4 numerical digit date code (year / week) jan 27 2011=1105 l = denotes rohs compliant line 3 = xxxxx internal use only may vary with lots black dot to denote pin 1 environmental & mechanical detail shock mil-std-883, method 2002 cond b solderability mil-std-883, method 2003 solvent re- sistance mil-std-202, method 215 vibration mil-std-883, method 2007, cond a gross leak test mil-std-883, method 1014, cond c fine leak test mil-std-883, method 1014, cond a2 msl level 1 per ipc/jedec j-std 20 ?? mil-std-883 level b screening available ?? available to -55 c to + 125 c operating ?? rohs compliant ?? less than 1 psec jitter lvds lvpecl pecl frequency range 70.000mhz to 800.000mhz frequency stability* (see part number guide for options) operating temp.range (see part number guide for options) storage temp. range -55c to +125c aging 5 ppm / yr max logic ?0? 1.43v typ vdd ? 1.620 vdc max vdd ? 1.620 vdc max logic ?1? 1.10v typ vdd- 1.025 vdc min vdd- 1.025 vdc min supply voltage (vdd) supply current +2.5vdc 5% 50 ma max 50 ma max n/a +3.3vdc 5% 60 ma max 60 ma max n/a +5.0vdc 5% n/a n/a 140 ma max symmetry (50% of waveform) (see part number guide for options) rise / fall time (20% to 80%) 2nsec max load 50 ohms into vdd-2.00 vdc start time 10m sec max phase jitter (12khz to 20mhz) less than 1 psec tri-state operation vih = 70% of vdd min to enable output vil = 30% max or grounded to disable output (high impedance) * inclusive of temp., load and voltage control voltage (vc) +2.5vdc 1.25vdc 1.00vdc 1.25vdc 1.00vdc n/a +3.3vdc 1.65vdc 1.50vdc 1.65vdc 1.50vdc n/a +5.0vdc n/a n/a 2.50vdc 2.00vdc pullability (see part number guide for options) linearity (see part number guide for options)
mmd monitor/quartzek ? an ilsi company, 5458 louie lane, reno, nv 89511 phone: (775) 851-8880, www.mmdcomp.com ? revision: 07/31/13 d revisions only with customer approval pg 2 of 2 b0 k0 notes: unless otherwise specified 1. applicable standards / specifications ansi y14.5m , dimensions and tolerances eia-481-b , 8 mm through 200mm embossed carrier taping and 8 mm and 12 mm punched carrier taping of surface mount components for automatic handling. 2. dimensions are in millimeters [inch]. 3. tolerances are 0.1 [.004] mm unless otherwise specified. 4. do not scale drawing. a0 direction of feed q2 q4 q3 q1 q4 q3 q1 q2 180 [7.0] reel dia pin 1 orient. qty per reel 500 q1 ao tape width pitch bo k0 1.85 [.073] 2.25 [.089] 0.95 [.037] 4.00 [.157] 12.00 [.471] pitch 2.00 4.00 7.50 tape width 1.75 reel dia part number guide mechanical details tape & reel dimensions mvi frequency output p = pecl l = lvpecl v = lvds *option b (47.5/52.5%) available up to 500mhz only please consult with mmd sales deparmen t for any other parameters or options linearity blank = 20% max x = 5% max z = 15% max y = 10% max operating temperature blank = 0c to +70c 27 = -20c to +70c 48 = -40c to +85c pullability a = 200 ppm min c = 100 ppm min d = 50 ppm min p = 25 ppm min frequency stability 020 = 20 ppm 025 = 25 ppm 050 = 50 ppm 100 = 100 ppm supply voltage 2 = +2.5 vdc 3 = +3.3 vdc 5 = +5.0 vdc symmetry * blank = 40%/60% a = 45%/55% b = 47.5%/52.5% 55 = -55c to +125c
|
